Overview:
1GE ONU is designed as HGU in different FTTH solutions; the carrier-class FTTH application provides data service access.
1GE ONU is based on mature and stable, cost-effective XPON technology. It can switch automatically with EPON and GPON mode when it access to the EPON OLT or GPON OLT.
1GE adopts high reliability, easy management, configuration flexibility and good quality of service (QoS) guarantees to meet the technical performance of the module of China Telecom EPON CTC3.0.
1GE is fully compliant with technical regulations such as ITU-T G.984.x and IEEE802.3ah.
1GE is designed by Realtek chipset 9601D
Feature:
Supports Dual Mode (can access GPON/EPON OLT).
Supports SFU and HGU of EPON CTC 3.0 standard.
Support NAT, Firewall function.
Support Flow & Storm Control , Loop Detection and Port Forwarding.
Support port mode of VLAN configuration
Support LAN IP and DHCP Server configuration
Support Route PPPoE/IPoE/DHCP/Static IP and Bridge mixed mode
Support IPv4/IPv6 dual stack
Support IGMP transparent/snooping/proxy
In compliant with ITU-T G.984.x and IEEE802.3ah standard
Compatible with popular OLT
Specification:
Technical Item
Details
PON interface
1 GPON/EPON port(EPON PX20+ and GPON Class B+)
Upstream: 1310nm, Downstream: 1490nm
SC/APC connector
Receiving sensitivity: 27dBm
Transmitting optical power: 0~+4dBm
Transmission distance: 20KM
LAN interface
10/100/1000Mbps auto adaptive Ethernet interfaces.
10/100/1000M Full/Half, RJ45 connector
LED
4 LED, For Status of POWER, LOS, PON, LAN
Push Button
2, for Function of Power on/off, Reset
Operating condition
Temperature : 0 50
Humidity : non condensing
Storing Condition
Temperature : 40℃℃~~+60
Humidity : non condensing
Power supply
DC 12V/1A
Power Consumption
<3W
Net Weight
<0.2kg